디에스앤지

고객의 미래가 디에스앤지의 미래입니다.

FAQ

X11Single 마더보드에서 LSI RAID Controller web bios 진입문제.(3008, 3108)

작성자 : 작성일 : 2017.06.29 조회수 : 3680

X11S 계열보드에 RAID controller 장착시 WebBIOS 진입 안되는 증상에 대한 해결방법 입니다.

간단한 BIOS 설정으로 해결 할 수 있습니다.

 

증상은 아래와 같습니다.


WebBIOS 진입 시, 다음과 같은 진행 화면 후

 

아래와 같이 화면이 깨지는 현상이 나타납니다.

 

해결 방법은 Delete 키를 사용하여 BIOS에 진입하신 후,

INT19 Trap Response를 Immediate(즉시)에서 Postponed(지연)으로 변경하시고 저장하시면 됩니다.

 

경로

Advanced >> Boot Feature >> INT19 Trap Response >> Postponed (default is "Immediate")

 

 

SMCI 관련 FAQ.

 

 

인터럽트 벡터 19h에 관련된 설명은 아래 링크를 참조하시기 바랍니다.

INT 19h (Wikipedia)

​

This is used by certain devices to intercept the normal boot process.

INT 19h (see Wikipedia) is a low-level system command normally used just after POST to boot the operating system. In typical end-user configurations outside of a business environment this setting may be ignored as it likely has no effect on your system.

Peripheral devices providing option ROMs such as network interface cards (PXE) or RAID storage controllers may intercept this command to run code that is required to set up the boot media (e.g RAID) before handing it over to the OS.

LIST